Okidoke. It’s taking me a while to get my act together, but I’m getting there. I have three kits available. They are kit serial numbers 1, 2, and 3.
The kit includes:
1. circuit board
2. eight 10k faders
3. two 10k potentiometers
4. thirty two LED Tact buttons (16 red, 16 green)
5. sixty four 100 ohm resistors
6. 9 various values of resistors other than 100 ohms
7. 16 x 2 LCD screen from Modern Device
8. LCD driver board kit (assembly is required) from Modern Device (where you will get the assembly instructions, BTW)
Things *not* included:
* Arduino Mega
* enclosure + hardware
Price is $249 plus shipping, payment via paypal, shipment via USPS if international, UPS if within the USA.
I even made two videos showing how to assemble the kits, so watch these before you do anything else. Make sure these totally makes sense to you, and you have no reservations about your ability to put this kit together. It’s not a particularly hard kit to put together, but there is a lot of repetitive soldering involved, so you’re the right candidate if you’re already comfortable with soldering, and you already have all of the tools you see in the videos. You’re also already familiar with the arduino platform and ALSO completely realize that this kit runs on the ARDUINO MEGA, and NOT any other variant. If you don’t have an ARDUINO MEGA, you NEED to BUY one. 🙂 I’m using every single pin on the mega. I couldn’t squeeze this much functionality out of a regular arduino… it’s just too awesome for the little guy.
You have to file down the headers because of where I chose to place the arduino mega. This is sort of cumbersome but it’s also how I was able to keep beatseqr from being any larger than it already is. The Roland TR-808 is cool and all, but c’mon already.. that thing is huge. Plus every square inch of circuit board costs big bucks, so squeezing the arduino into a shield configuration works well enough. I’d maybe try another tactic in the future, but this kits works today. I sold Beatseqr serial number 8 based on this kit.
Ok, so: 1. you read all of the above? 2. you saw both videos and aren’t tripping out? 3. you saw that you need an arduino mega? 4. still interested? email me steve at beatseqr dot com.